Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 2
Next »
- Make sure that the activated layer is the "profile" layer. (Use the option To use).
- In the Copy window, select the line rotation (Lines,Rotation).
- Enter an angle of 36 degrees. Make sure that the center is point (0, 0, 0) and that you are working in two dimensions.
- In the Multiple Copies box enter 9. This way, 9 copies will be made, thus obtaining the 10 teeth that form the profile of the model (9 copies and the original).
- Click Select and select the lines defining the profile. Press the ESC key or click Finish in the Copy window in order to conclude the operation. The result is shown in next figure.
